General Discussion Triathlon Talk » Index and friction mode?? Rss Feed  
Moderators: k9car363, alicefoeller Reply
2006-10-03 10:29 PM

User image

Veteran
192
100252525
Arlington, VA
Subject: Index and friction mode??
What is the difference between index and friction mode on barend shifters? I don't actually know what that means. Any advantage either way?


2006-10-03 11:39 PM
in reply to: #559785

New user
48
25
Los Angeles, CA
Subject: RE: Index and friction mode??
With index mode, you will feel a distinct "click" in the shifter as you shift from one gear to the next. The indexing in the shifter controls how far the derailleur travels on each shift.

With friction mode, there is no "click." You move the lever until you feel or hear the chain shift. You can then fine tune the position of the lever so that the chain isn't rubbing on the (front) derailleur or catching on the next cog (rear).

With barend shifters, the rear shifter is usually indexed, but the front shifter isn't.

Generally, indexing is probably easier because you just shift until you feel the click and don't have to worry about fine tuning the position. There may be times when friction mode would be necessary, however, such as when your shift levers don't match your drivetrain (e.g., using 8-speed shifters with a 9-speed drive train...it just won't work in index mode but probably will in friction mode).

Of course, friction mode is definitely better if you're old school!

Edited by MCH13 2006-10-03 11:40 PM
2006-10-03 11:46 PM
in reply to: #559785

User image

Expert
900
500100100100100
Austin, TX
Subject: RE: Index and friction mode??

Indexed means that the shifter will "click" with each gear shift and cause the derailleur to jump from gear to gear. Friction doesn't click into gear, but the shifter moves smoothly along with the derailleur.

Edit:  Oops.  Someone beat me to it.  I took too long on the post page  



Edited by runningfoo 2006-10-03 11:47 PM
2006-10-04 8:29 AM
in reply to: #559785

User image

Veteran
192
100252525
Arlington, VA
Subject: RE: Index and friction mode??
So in index mode on a bar end shifter - will the lever return to its original position after the click? Or does it travel up and down depending on the gear?
2006-10-04 8:38 AM
in reply to: #559785

User image

Elite
2527
200050025
Armpit of Ontario
Subject: RE: Index and friction mode??
The shift lever will go through the exact same range of motion whether indexed or friction, there will just be a distinct "click" during indexed,

Edited by sty 2006-10-04 8:38 AM
2006-10-04 10:47 AM
in reply to: #559785

User image

Champion
10668
500050005001002525
Tacoma, Washington
Subject: RE: Index and friction mode??
I run my shifters in friction mode all the time -- that way it doesn't matter if I change wheels or if I get a cassette that's 8-, 9-, or 10-speed, it'll shift just fine (well, aside from chain width issues).


2006-10-04 12:13 PM
in reply to: #559785

User image

Master
3019
20001000
West Jordan, UT
Subject: RE: Index and friction mode??

Others have explained the definitions.  I will just say that I'd stick with indexed for racing.  You can just flick it up or down a gear that way easy with a quick motion.  

2006-10-05 7:55 AM
in reply to: #559785

User image

Veteran
158
1002525
Southeastern PA
Subject: RE: Index and friction mode??

I like my bar end shifters in friction mode and I am old school! <img align='middle' src='https://beginnertriathlete.com/discussion/images/emoticons/wink.gif'>

 

New Thread
General Discussion Triathlon Talk » Index and friction mode?? Rss Feed