2011 Felt B16 Size 56

This bike I purchased as a backup when I cracked the frame of another bike. I fell in Love with this bike and it has been in my stable for two years now. The bike has had some upgrades and it has some miles on it. I am not going to try and pull the wool over anyone’s eyes saying that it has 100 miles and never rained on blah blah blah. This bike has seen over 3500 miles, it has been rained on; it has been raced however it has been meticulously taken care of. I have upgraded it to what I would consider it to be a very stellar build. The only blemish that I have been able to find is on the fork where the bars were twisted a bit far and the frame rubbed against the fork. If you are handy with wet sanding this could be taken care of very easily. Here are the specs.

Frame – Felt B16 Felt Aero TT/Tri UHC Performance MMC Carbon Fiber Frame w/ 3KP Finish. Full Aero Tubeset w/ Front & Rear wheel recesses, Internal Cable Routing, Forged horizontal dropouts size 56

STEM Felt SL 6061 Aluminum 3D Forged stem this was taken from a Felt AR5 so that the green matches (Size 110MM)

BARS: Profile design Cobra Wing base bar (carbon 42CM), Profile Designs T2+ carbon aerobars.

FRONT BRAKE: TriRig Omega Black

REAR BRAKE: Shimano Dura Ace 7800

BRAKE LEVERS: Profile Design QSC Quick Stop Carbon Levers

FRONT DERAILLEUR: Shimano Ultegra 6700 10 Speed with white K Edge Chain catcher

REAR DERAILLEUR: Shimano Ultegra 6700 10 Speed

SHIFT LEVERS:  10 Speed Shifters D/A compatible

CASSETTE: Shimano Ultegra 6700 11-27

CHAIN: Shimano Dura Ace 7900 10 Speed Chain

CRANKSET: Shimano Ultegra 6700 172.5 50/34

BOTTOM BRACKET: C Bear Ceramic BB (Black)

PEDALS: Shimano 6700Clipless Pedals

SADDLE: Felt SL Tri/TT saddle w/ Carbon injected base, gel nose

Wheels: Felt TTR-4 700c 30mm deep Aluminum w/ CNC machined braking surface. I have the Original Vittoria Zaffiro tires  (white) that were used for the test ride and have remained unused since and have been sitting in a box for the last couple of years. They will come on the bike.

I have recently recabeled the bike with Gore RideOn Pro (completely sealed) for rear shifting and Jagwire cables in white for the rest. I also installed an In-Line cable adjuster for the front derailleur.  Please ask questions. I will have a detailed photo gallery up shortly.

$1350 + $100 packing and shipping or local pick up.