Look 596 I-Pack - $

Forums

Forum guidelines BT super discount

Updated posts

My threads
No new posts

My favorite threads

General Discussion

Classifieds - New and Used Triathlon Gear » Look 596 I-Pack - $

Rss Feed

Moderators: k9car363, alicefoeller

SOLD

View 1 Gear Reviews of this product

jase714

2011-09-20 9:03 PM

Extreme Veteran

389

Central Wisconsin

Subject: Look 596 I-Pack - $

This is a 2009 596 that I bought from R&A in April of 2010. I just found out this week that I will be deploying overseas so rather than let this sit, I figured someone else could enjoy it. Asking $3200 obo. I need to sell this quick but will not accept any low ball offers.

The frame size is an XS (I typically ride a 51cm). The seat mast has been cut and the distance from the bottom bracket to the top of the seat mast is 57.15 cm (22.5 inches). I have a 30.5 inch inseam. With the supplied spacers, the seat can be raised about another 2 - 2.5cm.

The Zed cranks & pedals allow you to set the crank length from 170mm, 172.5 & 175mm. The stem can also be mounted in 2 positions, either high or low.

More pictures can be found here: http://s245.photobucket.com/...rakk2187/Look%20596/

The elastometers for the seat post, Zipp collet tool, Look cutting guide, and other accessories that came with the bike will be included in the sale. The saddle wing & Garmin accessories are NOT included.

Feel free to message me with any other questions.

FD: SRAM Red
RD: SRAM Red
Bar End Shifters: SRAM Red
Aero Bars: Zipp Vuka
Stem: Look
Cranks: Look Zed
Pedals: Look Zed
Brakes (Front and Rear): SRAM Red
Chain Ring: SRAM Red
Saddle: Cobb Plus
Wheels: Mavic Ksyrium SL

Edited by jase714 2011-09-20 9:14 PM

(Look596002-2-1.jpg)

Attachments
----------------
Look596002-2-1.jpg (52KB - 44 downloads)

jase714

2011-09-20 9:39 PM

in reply to: #3694277

Extreme Veteran

389

Central Wisconsin

Subject: RE: Look 596 I-Pack - $

For some reason the link isn't working... here is another attempt

http://s245.photobucket.com/albums/gg58/rakk2187/Look%20596/

jase714

2011-09-21 6:48 AM

in reply to: #3694320

Extreme Veteran

389

Central Wisconsin

Subject: RE: Look 596 I-Pack - $

I've gotten a few messages with questions about the bike and figured I should explain some of the features in more detail.

The bike has 3 sets of elastometers for the seat post. Each set of elastometers will give the bike a different "feel"; either soft, medium or stiff. To install the elastometers, all that needs to be done is remove the seat post, unscrew a bolt and slide the elastometers off and slide the new ones on.

To change the crank length, all that needs to be done is remove the pedal and then reposition so the tic mark on the pedal so that it aligns with the corresponding number (170, 172.5 or 175) on the crank arm.

This bike can either run 110 bcd chainring or a 130bcd chainring.

The high or low refers to where the stem is position. There are 2 mounting holes on the fork that the stem can be mounted in. Right now it is in the high position. The angle of the stem can also be easily adjusted by loosening the bolt and then moving the stem up or down. There are graduated clicks every 7.5 degrees. This works for both the high and low setting.

I dont know what length the stem is. Depending where I measure from it is either a 100mm or a 110mm. Look makes 5 different stems for this bike so if a rider needed a different size, they are available from any Look dealer.

Yes, you can run a Quarq powermeter on the bike. In order for it to be done, you would have to buy an adapter for the bottom bracket. However, the Zed cranks are probably the best set of cranks on the market and a user would be better off running a powertap rather than replacing the cranks.

The extensions for the aero bars have NOT been cut.

Edited by jase714 2011-09-21 6:49 AM

TrkHilo2k

2011-09-21 8:37 AM

in reply to: #3694277