Subject: RE: Help with Timex 100 lap watchacefaser - 2009-07-03 10:16 PM will display lap time in center section and total time in the smaller numbers below if you do this: in CHRONO Hit RECALL and wait about 5 seconds LAP with SPL will be displayed and now hit START SPLIT button until LAP is the larger of the two letters and displayed in the center. Now when you hit START SPLIT in CHRONO your lap time for that segment will be displayed in large numbers in the middle of your watch and the total time will be displayed at the bottom in smaller numbers. Is that what you were looking for? Ace
^^^Do what he said. The Timex Ironman watches can be set up one of two ways... 1. Show the running time in the big numbers and the lap time in the little numbers (above the big numbers ). This is how your watch is currently set up. 2. Show the current lap time in the big numbers and the overall running time in the little numbers (above the big numbers ). This is what I think you want. However, if you store the chrono into memory and then "recall" you WILL be able to see the laps you have already recorded...but they will be in format #1 until you switch the settings. |