$4200 Elite Razor for $1600

I have an Elite Razor, which is one of the most praised tri-bikes around. It is made of Easton Scanium Aluminum and was custom build and painted in the USA. This is a 2003 model. A new one with ultegra components would run you about $4200, but I am willing to let it go for $1600.

Why? I can only have one bike and I only do tris on occasion and need more of a road bike for my riding purposes.

As far as sizing goes, this bike is well suited for somebody around 6'1"-6"3 with a short torso and longer legs.

E-mail me at [email protected]. I take Paypal. I will include shipping in the price, or you can pick it up and I will lower the price to reflect what shipping would have cost. I am located in South Carolina and will be doing the remaining South Carolina Triathlon Series races, if you want to check it out.


Frame Measurements:
Seat tube length (BB to top tube): 57 CM
BB to top of collar: 68 CM
Top Tube: 51 CM
Steerer Tube: 16.5 CM (from headset to headset)
Standover: 81 CM
Chainstay: 42 CM
Downtube: 72.? degree
Seat tube angle: 76 or 76.5 degree ( I Failed geometry)

Component Measurements:
Ultegra (2003?) Crank Length: 180 MM
ITM Millenium Stem : 90 MM

Components:
Front Derailleur: Ultegra
Rear Derailleur (9speed): Ultegra
Brakes: Ultegra Brakes
Headset:Chris King
Fork: Reynolds Ouzo Fork
Profile Aerolite Bars
Brake Levers: Dia Compe
Bar End Shifters: Shimano
Seatpost: Bontrager Carbon
Wheels: Bontrager Select
Tires: Michelin Pro Race 2
Saddle (which I will keep, unless you really want it): Blackwell Flow

Colors and cosmetic damage:
Blue and white with a slight metallic sparkle
White seat and handlebar tape
scratches on one of the seat stays, due to transportation mishap (which I touched up)
cable rub on the steerer tube paint