Subject: FS: 2006 P3C 54cm frameset Bought the frame used off of a bike shop site unseen. Trusted their opinions on condition, etc... Well, big mistake. I own a 54 cm P2-SL and it is too short. I wanted to upgrade and the advertised 56cm P3C fit the bill. Well, the frame sat as my season was over. I finally started getting parts to build it up and I put the P3C next to my 54 P2-SL on wheels and the P3C wasn't that much longer. So, I broke out the tape measure and head tube measured roughly 4.2" which is the 54cm P3C. So, if you are looking to upgrade your frameset and the 54cm P3C fits you, it can be yours for $1400.00 including shipping. Frameset will be bubble wrapped and packed in a cervelo bike box with foam and shipped UPS ground. Overall condition of the frameset if very good for a 2006. There are 4 paint chips on the bottom of the down tube where the clearcoat has chipped from small rocks. (two near bottom bracket, 1 2" up, and 1 up near the fork ) That is it. There are no signs of structural issues. 75 degree seat angle: 54 | 700c | 72.5° | 60 | 557 | 105 | 609 | 380 | 762 | 498 | 419 |
78 degree seat angle: 54 | 700c | 72.5° | 60 | 530 | 105 | 609 | 380 | 762 | 498 | 419 |
Frame was never clamped in the stand... it was resting there for a picture only (as you can see I got as far as fitting cranks, brakes, and deraillers ). If interested, PM me or email: [email protected](IMG_1164.jpg) Attachments ---------------- IMG_1164.jpg (47KB - 24 downloads) |