FS: 2013 Scott Plasma Premium 3 size M 54cm w/ extras

I joined a team and will be riding a new bike this coming year so need to sell my current plasma. It is a 2013 frameset that is in great condition. There are no scratches or paint chips, etc that I can see. The only marks I can find on the frame is on the head tube from some cable rub. Bike has always been very well maintained and used really only for racing with limited training miles (most training is on the road bike). I would estimate about 1,500 on the frame. My saddle height is set at about 75 cm (measured from bottom bracket to center of saddle) with an additional cm or so in shims available so still a decent amount of post available to fit.

I just recently serviced the headset and the bottom bracket bearings are only a few months old as well which are Rotor/Enduro 4130 ceramic bearings so will fit either a Rotor 3D+ crank, Sram 900s or a Quarq BB30 crank- the bottom bracket standard is a BB86 so with new bearings will fit most cranks out there. I still have the manuals, extra seatpost shims, and misc hardware as well. I will also include the rear DA 7900 brake, front DA 9000 brake, xlab bento box, profile design cage (used behind the saddle, and xlab tool pod (used in the cage behind the saddle, profile design aerodrink (needs bracket), a set of TRP carbon brake levers (some scratches from transition but work great), and an extra rear derailleur hanger (hard to find).

Looking for 1,450 including shipping and PayPal fees. I am also located in denver so a local sale would be great as well!

Edited by andy515 2015-10-02 3:35 PM










Attachments
----------------
image.jpg (1925KB - 34 downloads)
image.jpg (1642KB - 31 downloads)
image.jpg (1981KB - 26 downloads)