Subject: RE: Question for Cycle Ops Power Tap users? from cycleops website: Displayed data blinks or does not function · Batteries need replacement - replace the computer batteries as shown in the maintenance section of the User Manual. · Interference with other devices - make sure you are not setting up the PowerTap inside a building with a lot of electrical noise, neon signs, or near power lines. Bring the PowerTap outside or away from the electrical disturbance to see if signal returns. Also make sure you don’t have any other devices on your bike such as lights, magnets or cycle computer sensors. found here: http://www.cycleops.com/pdfManuals/18562C_Layout%201.pdf Edited by JMINPNW 2012-02-14 10:21 AM
|