Subject: RE: The BT Garden ThreadA little bit more work done on the irrigation system. As I said before I have a well on the other side of the house so I'll be running a garden hose to the beds. I couldn't find a 1/2" poly to hose adapter so I used a 3/4" adapter, 3/4" coupling and 3/4"-1/2" reducer to connect the hose. 
This is a very simply layout. I have 1/2" poly pipe running down the entire row of beds (one for each row). As you can see, I just drilled a hole in the beds to run the line. I bought some stakes with a 1/4" pipe to connect to the line and some small 360 degree heads to water the hole bed. There will be 2 per bed. 
To seal off each end I bought some figure eight fittings and just pinched it. 
Now I just have to get a bit more cardboard. I only have enough right now for 4 of the 8 beds. Then I get to move all of the dirt for the beds. 
Here's the price breakdown for (6) 4'x10' x1' beds and (2) 4'x12'x1' beds. Beds - $200, I also got some leftover wood for free so it might be a bit more. Irrigation - $50 for 100' 1/2" poly pipe, 16 stakes/heads, 2 figure eight clamps, 2 hose connection assembly's. Dirt - $330 for 10 yards of good quality garden soil pre-mixed with compost from the local nursery, delivered. Edited by JoshR 2013-03-29 12:10 PM
|