Bicycle Maintenance: Must Have Tools
-
No new posts
Moderators: k9car363, alicefoeller | Reply |
![]() |
Expert ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() So I've got a gift card to REI that I've had since December, and can't believe it's lasted me this long. I've decided to use what I have left on it so get a couple bicycle maintence tools. I've got everything I would need to change a flat tire and a multi-tool to adjust things like seat height. My goal is to eventually have enough stuff to be able to make smaller repairs and adjustments myself. So what's in your bicycle tool box that you would consider 'must have'? |
|
![]() ![]() |
Champion ![]() ![]() ![]() ![]() | ![]() |
![]() ![]() |
![]() Chain whip Cassette cog remover Pedal wrench good set of hex tools (swiss army knife looking thing) good set of individual hex drivers chain cleaner machine spare skewers trainer wheel |
![]() ![]() |
Champion ![]() ![]() ![]() ![]() | ![]() DanielG - 2009-06-29 12:57 PM Chain whip Cassette cog remover Pedal wrench good set of hex tools (swiss army knife looking thing) good set of individual hex drivers chain cleaner machine spare skewers trainer wheel Spoke wrench Toothbrush Wire/Cable Clippers Zinn & the Art of Triathlon (or Road) Bikes
Edited by sesh 2009-06-29 1:01 PM |
![]() ![]() |
![]() | ![]() |
![]() ![]() |
Extreme Veteran ![]() ![]() ![]() ![]() ![]() | ![]() +10000000.... I built one but if I was to do it again (will someday) I would just buy it. I spent as much building it as buy one and it's not even as good. |
|
![]() ![]() |
Extreme Veteran ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() DanielG - 2009-06-29 10:57 AM Chain whip Cassette cog remover Pedal wrench good set of hex tools (swiss army knife looking thing) good set of individual hex drivers chain cleaner machine spare skewers trainer wheel For pure maintenance tools this is a great list, I would also add a crank puller, bike stand (like someone else mentioned) and if you want to get really fancy, a wheel trueing stand. |
![]() ![]() |
Champion ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() A big hammer and a pair of vice grips are all you need :P I will say that chain cleaner things are pretty worthless. I have yet to work with a mechanic that finds them useful. That doesn't mean there is not a bike mechanic who will disagree with me, but I've worked in 4 shops with upwards of 35 different mechanics. Remove your chain (buy a chain with a link, or learn how to use a chain tool). A cheap parts cleaner is to use a 32oz Gatorade bottle (nice large mouth) throw the chain in there with some undiluted simple green or other potent degreaser/cleaner shake for a bit then let it sit while you clean some more of the bike, then take the chain out, wipe dry and let it sit to air dry for a bit. Reinstall and lube and you are good to go. All the chain cleaning tools do is make a mess of your bike. |
![]() ![]() |
Pro ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() nevergivin - 2009-06-29 2:49 PM Bike maintenance stand. I love this stand! Don't forget to get the tool tray as well. I might also think about a basic tool kit, that has most of the tools you would need to get started. If I was prioritizing, I would get Zinn's book first, then the tool kit, then the stand. Because without the book (or a good hands on instructor), you won't know what you are doing; without the tools, you can't do what you need. But in a pinch, you can do the repair work on a hitch mount, or trainer. |
![]() ![]() |
Extreme Veteran ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() graceful_dave - 2009-06-29 12:18 PM A big hammer and a pair of vice grips are all you need :P I will say that chain cleaner things are pretty worthless. I have yet to work with a mechanic that finds them useful. That doesn't mean there is not a bike mechanic who will disagree with me, but I've worked in 4 shops with upwards of 35 different mechanics. Remove your chain (buy a chain with a link, or learn how to use a chain tool). A cheap parts cleaner is to use a 32oz Gatorade bottle (nice large mouth) throw the chain in there with some undiluted simple green or other potent degreaser/cleaner shake for a bit then let it sit while you clean some more of the bike, then take the chain out, wipe dry and let it sit to air dry for a bit. Reinstall and lube and you are good to go. All the chain cleaning tools do is make a mess of your bike. I would agree that the chain cleaners do not work super well. your way is good but I prefer to use a series of cleaners starting with really hot water to get the large stuff off, rinse the bottle of the crude, the hot water and soap, the degreeser, then a clean rinse in nice hot water again and then I put it on my special baking sheet and stick it is a warm to slightly hot oven to driy quickly and make sure that when I lube it up there is no water getting trapper in the pieces (trick I learned from a local mechanic) finally I lube it with your favorite lube and wipe off all excess and reinstall. So far that method works well for me though it is a bit more labor intensive. ![]() |
![]() ![]() |
Champion ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() bel83 - 2009-06-29 2:54 PM graceful_dave - 2009-06-29 12:18 PM A big hammer and a pair of vice grips are all you need :P I will say that chain cleaner things are pretty worthless. I have yet to work with a mechanic that finds them useful. That doesn't mean there is not a bike mechanic who will disagree with me, but I've worked in 4 shops with upwards of 35 different mechanics. Remove your chain (buy a chain with a link, or learn how to use a chain tool). A cheap parts cleaner is to use a 32oz Gatorade bottle (nice large mouth) throw the chain in there with some undiluted simple green or other potent degreaser/cleaner shake for a bit then let it sit while you clean some more of the bike, then take the chain out, wipe dry and let it sit to air dry for a bit. Reinstall and lube and you are good to go. All the chain cleaning tools do is make a mess of your bike. I would agree that the chain cleaners do not work super well. your way is good but I prefer to use a series of cleaners starting with really hot water to get the large stuff off, rinse the bottle of the crude, the hot water and soap, the degreeser, then a clean rinse in nice hot water again and then I put it on my special baking sheet and stick it is a warm to slightly hot oven to driy quickly and make sure that when I lube it up there is no water getting trapper in the pieces (trick I learned from a local mechanic) finally I lube it with your favorite lube and wipe off all excess and reinstall. So far that method works well for me though it is a bit more labor intensive. ![]() If you're going to go that far, you might as well do it right ![]() http://sheldonbrown.com/chainclean.html |
|
![]() ![]() |
Champion ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() |
![]() ![]() |
Master![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() I think a bike stand is a GREAT investment. Nothing more frustrating than knocking your bike over every time you try and work on it or clean it. |
![]() ![]() |
Elite ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() fsr402 - 2009-06-29 3:09 PM nevergivin - 2009-06-29 1:49 PM Bike maintenance stand. +10000000.... I built one but if I was to do it again (will someday) I would just buy it. I spent as much building it as buy one and it's not even as good. I use the bike rack on the back of my car. Works like a charm.... |
![]() ![]() |
Veteran![]() ![]() | ![]() I hang my bikes in the garage from those pulley systems. For work, I pull the bike up to whatever level is correct. I cannot get any leverage for force in this situation, but works fine for routing maintenance/cleaning. Plus, I also have them. Solves two problems with one answer. Gordon |